Shop Now
How it mount

Easy Jeep Hand Installation Guide

Discover the best ways to install and display your Jeep Hand with simple, secure mounting methods. From mirrors and bumpers to interior and spare tire setups, personalize your Jeep’s look while ensuring a clean, durable, and highly visible installation.

Description:

Welcome to Jeep Tribe! This video highlights creative ways to display your Jeep hand and make your wave stand out. Since every Jeep is different, there’s no single mounting method, get creative and personalize your setup. Your package includes basic items like zip ties, with options to upgrade using clips or clamps. For easy interior placement, try a clamp near the driver’s side, and share your setup with the community.

Instructions
  • Pick a spot on your Jeep where you want to display your Jeep hand.
  • Position it so it enhances your Jeep wave and is easily visible.
  • Keep in mind that there’s no wrong way, make it your own!
  • Adjust the placement based on your Jeep’s style and layout.
  • Start with the included zip ties for a simple setup.
  • Try using a double-sided carabiner for added flexibility.
  • Explore additional clips or mounting accessories if needed.
  • Consider using a clamp inside near the driver’s side for convenience.
Description:

This video shows a creative method for installing a Jeep hand accessory inside your vehicle using a clean, secure, and non-damaging approach. It explains how to position the hand so it is clearly visible from outside while remaining unobtrusive for the driver. The setup balances visual appeal with practicality, ensuring the accessory enhances style without interfering with everyday driving comfort.

Instructions
  • Get a two-inch hand clamp and two zip ties.
  • Place the Jeep hand upright on top of the clamp.
  • Position one zip tie along each side of the hand.
  • Run the zip ties through the openings in the clamp.
  • Place small carpet pieces beneath the ties to protect the silicone.
  • Tighten both zip ties until the hand is firmly attached.
  • Move the assembled hand and clamp inside the Jeep.
  • Position the clamp beside the driver’s-side dashboard speaker and tighten it, ensuring the hand is secure, visible from outside, and outside the driver’s field of view.
Description:

This video explains how to attach a Jeep hand beside the driver’s-side mirror using a zip tie. It covers positioning the hand for clear visibility and comfort, then securing it by wrapping and tightening the tie around the wrist and mirror support. It also advises against placing it on top of the mirror, emphasizing a stable, upright, and unobstructed setup with a final security check.

Instructions
  • Gather the Jeep hand and a long zip tie.
  • Choose a position beside the driver’s-side mirror, avoiding the top of the mirror assembly.
  • Hold the hand in place to test its angle and visibility.
  • Rest the wrist area against the lower mirror support for better stability.
  • Wrap the zip tie around the wrist and mirror support.
  • Insert the end of the zip tie through its locking head.
  • Pull the zip tie gradually while holding the hand upright.
  • Adjust the position so the hand remains visible without blocking the mirror.
  • Tighten the zip tie and check that the hand stays securely in place.
Description:

This guide shows how to firmly attach an accessory to your vehicle’s side mirror using two zip ties. By repositioning them, you can create a tighter, cleaner hold. Loop the ties through the attachment point and around the mirror for stability. Once secured, the setup remains discreet, heat-resistant, and does not interfere with mirror movement.

Instructions
  • Take a look at your side mirror and find a solid spot where you can safely wrap the zip ties.
  • Remove any loose attachment that isn’t holding the accessory in place.
  • Hold the accessory against the mirror and move it around until it looks right.
  • Thread the first zip tie through the accessory and around the mirror.
  • Add a second zip tie the same way for extra support.
  • Try to tuck the zip tie heads behind or under the attachment so it looks cleaner.
  • Tighten both zip ties until everything feels secure and doesn’t move.
  • Add some padding if needed, then move the mirror to make sure everything still works properly.
Description:

This Jeep Tribe guide explains how to securely attach a decorative hand to your Jeep’s front bumper. Position the hand near the bumper hooks, choosing either an upright or relaxed hanging display. Use a zip tie between the thumb and index finger to hold it in place, and add a second tie around the base for extra stability. Trim and conceal any excess zip tie for a neat, finished appearance.

Instructions
  • Pick a good spot on the front bumper, ideally near one of the hooks.
  • Take a quick look at your judging sheet to see how many points this decoration might get.
  • Decide how you want the hand to look, either standing up or hanging down.
  • Hold the hand in place and move it around until it looks just right.
  • Slide a zip tie between the thumb and index finger of the hand.
  • Wrap the zip tie around a solid part of the bumper or hook.
  • If it feels loose, add another zip tie around the base for extra support.
  • Tighten the zip ties, trim off the extra, and adjust the hand so everything looks neat and secure.
Description:

This video demonstrates how to prepare and position a Jeep hand on the front bumper near the tow hook. It shows the hand being placed upright, then secured with two zip ties wrapped around its wrist area. The ties are tightened one at a time while the hand is held in position. The final placement is adjusted so the hand remains clearly visible, stands securely on the bumper, and keeps the Jeep’s front area unobstructed.

Instructions
  • Choose a position on the front bumper near the tow hook.
  • Hold the Jeep hand upright to check its placement.
  • Gather two zip ties for securing the hand.
  • Loop the first zip tie around the wrist area and insert the end through its locking head.
  • Add the second zip tie around the other side of the wrist.
  • Tighten both ties gradually while holding the hand upright.
  • Place the hand beside the tow hook and adjust its angle.
  • Check that the hand stands securely and remains clearly visible.
Description:

This video shows how to secure a Jeep hand to the rear spare wheel using two zip ties. The hand is placed at the lower center so it stays visible without blocking the wheel’s middle. Each tie is threaded through rim openings and wrapped across the wrist. They are tightened gradually while adjusting the hand upright, ensuring it is firmly attached and clearly displayed.

Instructions
  • Gather the Jeep hand and two long zip ties.
  • Choose the lower center area of the rear spare wheel.
  • Hold the hand against the wheel with the palm facing outward.
  • Pass the first zip tie through an opening in the rim.
  • Bring the tie across one side of the hand’s wrist area.
  • Pass the second zip tie through the opening on the opposite side.
  • Tighten both ties gradually while keeping the hand upright.
  • Adjust the hand and check that it remains secure and clearly visible.